QJS RINSE SYSTEMS

QJS RINSE SYSTEMS

The correct rinse is critical to the effectiveness and success of your cleaning system 


With today's need for minimising waste, achieving water savings and reducing energy usage - as well as an increasing focus on hygiene demands - QJS produce bespoke rinse options to suit your food processing demands.

Rinse with the LOWEST pressure, which means that your aerosol and over spray issues are eliminated.
Rinse with the least amount of water, which means that you can achieve huge water and effluent savings.
Power the water using the highest possible efficiency motors, meaning you achieve large electricity savings over conventional methods.
Combine with a ChemPoint or ChemFlow chemical application for a full chemical and disinfection hygiene system suited to your individual needs.
QJS Rinse

WHY IS THE
CORRECT RINSE SO IMPORTANT?


As a default, QJS offer medium pressure as our rinse solution. Widely accepted as the best rinse for food manufacturers, medium pressure offers a higher impact that low pressure and better LPM (litre per minute) flow. 

High pressure systems are now old fashioned. They are costly to maintain and prone to breakdowns. They also cause an issue called "overspray", where debris is sprayed to other areas of the factory which then requires cleaning again. By using medium pressure, you avoid this as well as reducing the risk of damage to production equipment.

HOW TO CLEAN WITH A...
QJS RINSE SYSTEM


If you only opt for the installation of a QJS rinse system, you will have to ensure your chemical application is managed through other equipment, such as a Technifoamer.

It can be beneficial to install a rinse system if you are suffering from "aerosol". This is where your high pressure system is atomizing the biofilms and proteins, lifting chemicals into areas which you do not want chemicals to reach such as light fixtures and electronic equipment.

The 5 Stages of Effective Rinse Cleaning

 
 Pre-Rinse - Wash off debris
  Foam - Lift any biofilm with a layer of chemical foam
  Second Rinse - Remove any emulsion chemicals
 Disinfect - Apply your disinfectant chemical for a final clean.
 Final rinse - Once dry, production can begin
 

Combine your rinse system with a QJS Chemical Application system


A cleaning and hygiene system designed bespoke to your individual site needs. With a principle based on satellite cleaning points situated throughout production areas, your operators can perform all of the cleaning stages of foam, rinse and disinfectant through one single hose.

This provides a host of benefits:

Food Safety - Gives you and your customers peace of mind
Environmental - Minimum energy, water and chemical usage
Safety - Protection of your operators
Reliability - Trouble free service
Efficiency - Savings in labour, power, water, chemicals and time

FIND OUT MORE

What components make up a QJS rinse system?

QJS PowerBoost 

 
The PowerBoost is the most common and cost effective way of providing water power to your ChemPoint and ChemFlow systems.

The basic format is a water lubricated, high efficiency multi stage pump mounted on a base frame. Includes all controls required so that the pump starts up, speeds up and slows down according to the exact requirement from the users at any one point. The PowerBoost is also the option for large scale users where models to power up to 30 users are available.

 
  • High efficiency pumps producing water power at minimal cost to you
  • Models to provide from 5 to 30 users – exactly sized to suit your needs
  • Totally water lubricated for trouble free service and durability
  • Provides water power for either ChemPoint or ChemFlow systems
  • Low & medium pressure options available to suit your specific needs

DOWNLOAD THE QJS POWERBOOST SPEC SHEET
 

QJS PowerBox

 
The PowerBox is a booster pump built in to a stainless steel hygienic cabinet.

This unit takes water from the factory water supply and boosts it to the ideal QJS rinse pressure. This water is then provided to either the ChemPoint or ChemFlow satellites.
 
  • Includes high efficiency pump to provide water power at minimal cost to you
  • Provides water power for either ChemPoint or ChemFlow systems
  • Totally water lubricated for trouble free service and durability
  • Built of solid stainless steel with hygienic stainless cover for your long term reliability and hygiene.
  • Can be mounted on the wall in production area.
  • Models to power up to 5 or 10 users simultaneously.

DOWNLOAD THE QJS POWERBOX SPEC SHEET
 

QJS SYSTEMS
TALK TO ONE OF OUR EXPERTS 


Contact us today, and discuss with one of our experts about how we can help deliver the best QJS solution to your business.